windows 7 crashes when trying to formate floppy disk

Verify the floppy drive is properly configured in BIOS setup. If other floppies work, you may have a bad floppy diskette. Verify that other floppy diskettes are not exhibiting the same issue. If you do not have a tab, place tape over this hole.īecause of the technology of floppy diskette drives, the floppy diskettes ist most likely bad. Verify the diskette is not write protected by sliding the tab into the opposite position, preventing light from shining through it. Verify the floppy diskette you are attempting to read from is not write protected or bad.

For floppy read errors see: Why can't my computer read a floppy diskette? Bad floppy diskette The WIM file for WINDOWS 1 are TOO LARGE for FAT32.The troubleshooting options and details below are for floppy disk drive issues and not for issues about being unable to read one or two floppy disks. You can use exFAT or NTFS on newer models, however older systems are NOT able to boot from external boot media using NTFS.įor these models it cannot be exfat and larger than 32 gigs or usb 3.X drive. This means that past 1803 the WIM file is TOO LARGE for a FAT32 flash drive. This means that you cannot copy a file that is larger than 4 GB to any plain-FAT volume. The 4 GB barrier is a hard limit of FAT32: the file system uses a 32-bit field to store the file size in bytes, and 2^32 bytes = 4 GB (actually, the real limit is 4 GB minus one byte, or 4,294,967,295 bytes, because you can have files of zero length). It also means that ISO must be burned to DUAL Layer DVD media because the base installer is no longer smaller than 4.7 gigs.

This is why I recommend using USB 2.0 optical drive and OEM system builder DVD for reinstall. The media must be at least 16 gigs and not larger than 32 gigs and USB 2.0.

Windows 7 crashes when trying to formate floppy disk